Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
202
show ip dhcp relay option60 [identifier desc 255 | default]
Parameters
13-8 ip dhcp relay option61
This command is used to enable the DHCP relay Option 61 function. The no form of this command is used to disable
the DHCP relay Option 61 function.
ip dhcp relay option61
no ip dhcp relay option61
desc 255 Specifies the specified string.
default Specifies the default relay server configuration.
Default
None.
Command Mode
Privileged Mode.
Command Default Level
Level: 2
Usage Guideline
This command is used to show the entries of the DHCP relay Option 60.
Example
This example shows how to show the result of the show ip dhcp relay option60
command.
DXS-3600-32S#show ip dhcp relay option60
Default Servers:
10.90.90.90
Matching Rules:
String Match Type IP Address
------- --------- ---------
MSFT 5.0 Exact Match 10.90.90.90
Total Entries : 1
DXS-3600-32S#
Parameters
None.
Default
By default, this option is disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 8
Usage Guideline
When the Option 61 is enabled, if the packet contains Option 61, it will be based on
the Option 60 field to determine the relay server.
You can verify your settings by entering the show ip dhcp relay option61
command.
Example
This example shows how to enable the ip dhcp relay option61 function.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#ip dhcp relay option61
DXS-3600-32S(config)#
Loading ...
Loading ...
Loading ...