Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
552
56-3 sntp interval
This command is used to set the interval for the SNTP Client to synchronize its clock with the NTP Server.
sntp interval SECONDS
no sntp interval
Parameters
56-4 show sntp
This command is used to to show the SNTP information.
show sntp
Example
This example shows how to remove the NTP server.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#no sntp server 172.21.118.9
DXS-3600-32S(config)#
SECONDS Specifies the synchronization interval from 30 to 99999 seconds
Default
720 seconds.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 15
Usage Guideline
Use this command to set the query interval.
You can verify your settings by entering the show sntp command.
Example
This example shows how to set the poll interval to 100 seconds.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#sntp interval 100
DXS-3600-32S(config)#
Parameters
None.
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 3
Usage Guideline
This command is used to show the settings about the SNTP state, server status and
poll interval.
Loading ...
Loading ...
Loading ...