Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
142
Route Map for Incoming
Routes
Indicates a route map name which the route updates received from the neighbor
must be applied.
Route Map for Outgoing
Routes
Indicates a route map name which the route updates sent to the neighbor must be
applied.
Unsuppressed Route Map Indicates a route map name which the routes previously suppressed by the
aggregate-address command must be applied.
Outbound Route Filter (ORF)
type (64) Prefix list
Indicates the state of the ORF prefix list.
Send Mode Indicates whether the local BGP send ORF prefix list to the neighbor.
Receive Mode Indicates whether the local BGP receive ORF prefix list from the neighbor.
IP Prefix List (ORF) Name of the IP prefix list received from the neighbor. The name is made up by the IP
address by the dotted decimal notation dot Address Family Identifier (AFI) dot
Subsequent Address Family Identifier (SAFI).
entries (ORF) Number of entries of the prefix list.
Seq (ORF) Sequence number of the entry.
permit (ORF) Indicates that routes matched the IP prefix behind will be advertised to the neighbor.
deny (ORF) Indicates that routes matched the IP prefix behind will not be advertised to the
neighbor.
le (ORF) Less than or equal. Indicates the length of the mask.
ge (ORF) Greater than or equal. Indicates the length of the mask.
Prefix Max Count Show the maximum number of prefixes the local BGP can accept.
Prefix Warning Threshold Indicates in which percentage of the maximum prefixes the local BGP begin to log
warning message.
Prefix Warning Only Indicates whether the local BGP terminate the session of the neighbor after the total
BGP routes reach the maximum prefixes.
Total neighbor number Indicates the total number of neighbors in the local BGP router.
Example
This example shows how to display routes advertised for only the 172.16.232.178
neighbor.
DXS-3600-32S#show ip bgp neighbors 172.16.232.178 advertised-routes
BGP Local Router ID is 10.90.90.90
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? - incomplete
IP Address/Netmask Gateway Metric LocPrf Weight Path
*>i 10.0.0.0/24 172.16.232.179 0 100 0 ?
*> 10.20.2.0/24 172.1.1.2 0 32768 i
DXS-3600-32S#
Display Parameters Description
BGP Local Router ID The router identifier of the local BGP router.
Status codes Status of the table entry displayed at the beginning of each line. It can be one or
more of the following values:
s - The table entry is suppressed.
d - The table entry is damped.
h - The table entry is damped and has been withdrawn by the neighbor.
* - The table entry is valid.
> - The table entry is the best entry to use for that network.
i - The table entry was learned via an internal BGP (iBGP) session.
Display Parameters Description
Loading ...
Loading ...
Loading ...