Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
340
36-3 show monitor
This command is used to display monitor sessions.
show monitor [session session_number]
Parameters
session_number Specifies the mirror session number to display.
Default
All the monitor sessions are displayed.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 3
Usage Guideline
The command can be used to display mirror sessions. All monitor sessions are
displayed if you do not specify the session number.
Example
This example shows how to display all the mirror sessions.
DXS-3600-32S#show monitor
sess-num: 1
src-intf:
TenGigabitEthernet1/0/1 frame-type Both
TenGigabitEthernet1/0/2 frame-type Both
TenGigabitEthernet1/0/3 frame-type Both
dest-intf:
TenGigabitEthernet1/0/9
acl-name: mac_based_mirr
sess-num: 2
src-intf:
TenGigabitEthernet1/0/5 frame-type RX
dest-intf:
TenGigabitEthernet1/0/21 / port-group 1
acl-name:
DXS-3600-32S#
Display Parameters Description
sess-num Mirror session number, the range is from 1 to 4.
src-intf The source port list of mirror session.
frame-type The mode of mirrored traffic, such as RX, TX and both.
dest-intf The destination port of mirror session. If it is a trunk member, the trunk group id will
be also displayed.
acl-name The ACL name of flow_based mirror.
Loading ...
Loading ...
Loading ...