Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
191
Debug Commands
12-1 debug enable
This command is used to set the debug state as enabled. Users can use no debug command to disable the debug
state.
debug enable
no debug
12-2 error-reboot enable
This command is used to set the switch to be rebooted when a fatal error occurs. Use the no error-reboot command
to set the switch not to be rebooted when a fatal error occurs.
error-reboot enable
no error-reboot
Parameters
None.
Default
The default debug state is enabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 15
Usage Guideline
Enabling the debug state, allows for debug message output. Disabling the debug
state, does not allow debug message output.
Example
This example shows how to enable the debug state.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#debug enable
DXS-3600-32S(config)#
Example
This example shows how to disable the debug state.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#no debug
DXS-3600-32S(config)#
Parameters
None.
Default
The default state of error-reboot is enabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 15
Usage Guideline
Enabling the error-reboot state, will force the switch to reboot when a fatal error
occurs. Disabling the error-reboot state, will not force the switch to reboot when a
fatal error occurs.
Example
This example shows how to enable the state of the error-reboot option.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#error-reboot enable
DXS-3600-32S(config)#
Example
This example shows how to disable the state of the error-reboot option.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#no error-reboot
DXS-3600-32S(config)#
Loading ...
Loading ...
Loading ...