Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
543
v3 Specifies that SNMPv3 should be used for the group. SMNPv3 is the most secure of
the supported security models, as it allows you to explicitly configure the
authentication characteristics.
auth Specifies authentication of a packet without encrypting it.
noauth Specifies no authentication of a packet.
priv Specifies authentication of a packet with encryption.
read READ-VIEW (Optional) Specifies a read view for the SNMP group. The read-view argument
represents a string that is the name of the view that enables you to view only the
contents of the agent.
write WRITE-VIEW (Optional) Specifies a write view for the SNMP group. The write-view argument
represents a string that is the name of the view that enables you to enter data and
configure the contents of the agent.
notify NOTIFY-VIEW (Optional) Specifies a notify view for the SNMP group. The notify-view argument
represents a string that is the name of the view that enables you to specify a notify,
inform, or trap.
Default
No default access control list is associated with any group.
The default settings of SNMP group are as following:
Group Name Version Security Level Read View
Name
Write View
Name
Notify View
Name
initial SNMPv3 noauth restricted None restricted
public SNMPv1 noauth CommunityView None CommunityView
public SNMPv2c noauth CommunityView None CommunityView
private SNMPv1 noauth CommunityView CommunityView CommunityView
private SNMPv2c noauth CommunityView CommunityView CommunityView
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12
Usage Guideline
An SNMP group defines the access method, the read view, the write view, and the
notification view.
For the access method, it means that when the user who belongs to this group must
use the version, access method (for V3) to access the SNMP agent.
For the read view, it means that the user who belongs to this group can only read
objects that fall in this view. For the write view, it means that the user who belongs to
this group can only write objects that fall in this view. The access to objects range out
of the view will get error messages.
For the notification view, it means that the system will check whether the trap
manager owns the view to the binding objects associated with the notification
packet. The notification will not sent to a trap manager if it does not own the
notification view to the binding objects.
Example
This example shows how to create SNMP group test with SNMPv1.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#snmp-server group test v1
DXS-3600-32S(config)#
Example
This example shows how to remove snmp group test.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#no snmp-server group test
DXS-3600-32S(config)#
Loading ...
Loading ...
Loading ...