Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
149
7-86 show ip bgp route-map
This command is used to display networks which match route-map of Border Gateway Protocol.
show ip bgp route-map [{all | rd ASN:NN | vrf VRF-NAME}] MAP-NAME
Parameters
Example
This example shows how to display the reflection configuration of BGP.
DXS-3600-32S#show ip bgp reflection
Client to Client Reflection State : Disabled
Cluster ID: 0.0.0.0
Route Reflector Client:
peer group: inter (172.18.10.1)
172.18.10.3
172.18.10.4
172.18.10.5
DXS-3600-32S#
Display Parameters Description
Client to Client Reflection
State
Indicates the state of the route client to client reflection.
Cluster ID Indicates the cluster ID of the local route reflection.
Route Reflector Client Clients of the local route reflector, including peer group clients list and the individual
clients list by IP addresses below.
peer group Indicates the name of the peer group with the peer group members in the
parentheses separated by comma.
all (Optional) Specifies to display routes of all VPN and VRFs.
rd ASN:NN (Optional) Specifies to display routes with the specified Route Distinguisher. The
ASN:NN can be IP address:number or AS number:number.
vrf VRF-NAME (Optional) Specifies the VRF name. The length of the VRF-NAME is 12 characters.
MAP-NAME Specifies the name of a route map. The maximum length is 16 characters.
Default
None.
Command Mode
Privileged Mode.
Command Default Level
Level: 3. (EI Mode Only Command)
Usage Guideline
This command displays the networks according to the specified route-map.
Example
This example shows the output from the show ip bgp route-map command, in
privileged mode.
DXS-3600-32S#show ip bgp route-map my
BGP Local Router ID is 10.90.90.90
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? - incomplete
IP Address/Netmask Gateway Metric LocPrf Weight Path
*> 10.0.0.0/8 0.0.0.0 0 100 32768 i
DXS-3600-32S#
Loading ...
Loading ...
Loading ...