Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
288
27-3 ip directed-broadcast
This command is used to enable forwarding of IP directed broadcasts on an interface where the broadcast becomes a
physical broadcast. Use no command to disable forwarding of IP directed broadcasts on an interface.
ip directed-broadcast
no ip directed-broadcast
27-4 ip default-gateway
This command is used to set a default gateway address for the out-band interface. Use no command to remove the
default gateway address.
ip default-gateway ip-address
no ip default-gateway ip-address
Parameters
Example
This example shows how to make the interface of VLAN 1 obtain an IP address
automatically.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#interface vlan 1
DXS-3600-32S(config-if)#ip address dhcp
DXS-3600-32S(config-if)#
Parameters
None.
Default
By default, this option is disabled.
Command Mode
Interface Configuration Mode.
Command Default Level
Level: 8. (EI Mode Only Command)
Usage Guideline
This command enables the forwarding of IP directed broadcast on an interface
where the broadcast becomes a physical broadcast.
The no form of this command disables the forwarding of IP directed broadcast on an
interface.
Users can verify the settings by entering the show ip interface command.
Example
This example shows how to enable the IP directed broadcast on interface VLAN
100.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#interface vlan 100
DXS-3600-32S(config-if)#ip directed-broadcast
DXS-3600-32S(config-if)#
ip-address Specifies the IP address of the default gateway.
Default
There is no default gateway defined for out-band interface.
Command Mode
Interface Configuration Mode.
Command Default Level
Level: 8
Loading ...
Loading ...
Loading ...