Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
464
47-19 show ip pim
This command is used to display PIM global information.
show ip pim
Example
This example shows PIM-SM RP information for 229.1.3.1.
DXS-3600-32S#show ip pim sparse-mode rp-hash 229.1.3.1
RP: 10.2.0.2, via bootstrap
Uptime 00:36:46, expires in 00:01:44
DXS-3600-32S#
Example
This example shows PIM-SM RP information for 239.0.0.0.
DXS-3600-32S#show ip pim sparse-mode rp-hash 239.0.0.0
RP: 10.90.90.90, static
DXS-3600-32S#
Display Parameters Description
static Group-to-mapping information from the static rendezvous-point configuration.
RP Address of the rendezvous point for that group.
Parameters
None.
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 3. (EI Mode Only Command)
Usage Guideline
Use this command to display global information of PIM.
Example
This example shows global information of PIM.
DXS-3600-32S#show ip pim
Register Suppression Time : 100
Register Keepalive Time : 185
C-RP Wildcard Prefix Count : 1
SPT Threshold : 0
RP Address
1.1.1.1, group-list: static-rp-acl
RP Candidate
vlan1, group-list: candidate-rp
vlan2, group-list: crp-system
SSM Group : ssm-acl
Old Register Checksum to RP Address
-----------------------------------
172.18.1.2
DXS-3600-32S#
Display Parameters Description
Register Keepalive Time Value in seconds. To configure this value, use command ip pim rp-register-kat.
Loading ...
Loading ...
Loading ...