D-Link DXS-3600-32S 24-port Top Of Rack 10 Gigabit Managed Switch With Expansion Slot

User Manual - Page 378

For DXS-3600-32S.

PDF File Manual, 695 pages, Read Online | Download pdf file

DXS-3600-32S photo
Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
370
38-42 lsp trigger
This command is used to configure an LSP trigger filter rule. Use the no form of this command to remove the rule.
lsp trigger [SN] {permit | deny} {ip NETWORK-PREFIX/PREFIX-LENGTH | any}
no lsp trigger [SN [- | ,]]
Parameters
Example
This example shows how to trace route the LSP for network 192.1.1.0/24.
DXS-3600-32S#traceroute lsp 192.1.1.0/24
Tracing route to 192.1.1.0/24
1 Reply from 170.1.1, time<10ms
2 Reply from 200.1.2.3, time=20ms
3 Reply from 210.1.1.4, time=30ms
4 Reply from 192.1.1.1, time=40ms
Trace complete.
DXS-3600-32S#
Example
This example shows how to trace route the LSP for network 110.1.1.0/24.
DXS-3600-32S#traceroute lsp 110.1.1.0/24
Tracing route to 110.1.1.0/24
1 Reply from 170.1.1, time<10ms
2 Request time out
Trace complete.
DXS-3600-32S#
SN (Optional) Specifies the sequence number of the LSP trigger filter rule. When
creating a new rule and the SN option is not specified, the SN value will begin from
10 and will then be incremented by 10. When removing a rule and the SN option is
not specified, all rules will be removed. The SN range is 1-10000.
permit Specifies to permit LDP establishing LSP for the following IP prefix FEC.
deny Specifies not to permit LDP establishing LSP for the following IP prefix FEC.
ip NETWORK-PREFIX/
PREFIX-LENGTH
Specifies the IP prefix FEC for the rule.
any Specifies that the rule will be applied to any IP prefix FEC.
Default
No LSP trigger filter rule.
Command Mode
MPLS Router Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
This command is used to configure an LSP trigger filter rule. The LSP trigger filter
rules are IP access list rules that it is used to control the IP routes that can be used
to trigger the establishment of an LSP. For example, if there are two routes for
172.18.1.0/24 and 172.18.2.0/24 and if the LSP trigger filter permits 172.18.1.0/24
and denies 172.18.2.0/24, then the switch can only establish an LSP for 172.18.1.0/
24.
Loading ...
Loading ...
Loading ...