Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
377
Network Connectivity Test Commands
39-1 ping
This command is used to test the connectivity of a network.
ping [vrf <string 1-12>] {[ip] ip-address | host-name} [ntimes times] [timeout seconds] [source source]
Parameters
39-2 traceroute
This command is used to trace the routed path between the switch and a destination end station.
traceroute [vrf <string 1-12>] {[ip] ip-address | host-name} [probe number] [timeout seconds] [ttl maximum]
Parameters
vrf <string 1-12> Specifies the VRF name for the ping test. If the VRF is not specified, it works in the
global routing forward space. Currently, the VRF doesn’t influence the IPv6.
ip-address Specifies the destination IPv4 address.
host-name Specifies the destination’s host name.
times Specifies the number of packets to be sent.
seconds Specifies the time out value.
source Specifies the source IPv4 address.
Default
By default the times is infinity, the timeout is 1 second.
Command Mode
Privileged Mode.
Command Default Level
Level: 1
Usage Guideline
This command tests the connectivity of a network.
Example
This example shows how to tests the connectivity of a network.
DXS-3600-32S#ping ip 192.168.69.66
Reply from 192.168.69.66, time<10ms
Reply from 192.168.69.66, time<10ms
Reply from 192.168.69.66, time<10ms
Reply from 192.168.69.66, time<10ms
Ping Statistics for 192.168.69.66
Packets: Sent =4, Received =4, Lost =0
DXS-3600-32S#
vrf <string 1-12> Specifies the VRF name for the trace route test. If the VRF is not specified, it works
in the global routing forward space. Currently, the VRF doesn’t influence the IPv6.
ip-address Specifies the IPv4 address of the destination end station.
host-name Specifies the host name of the destination end station.
number Specifies the number of probe packets for each TTL.
seconds Specifies the timeout period while waiting for a response from the remote device.
maximum Specifies the maximum number of routers that a trace route packet can cross, while
seeking the network path between two devices.
Loading ...
Loading ...
Loading ...