Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
459
47-14 show ip pim neighbor
This command is used to display PIM neighbor information.
show ip pim neighbor [IFNAME]
Parameters
Usage Guideline
This command displays PIM-DM configuration information.
Example
This example shows how to display the information of all PIM-DM interfaces.
DXS-3600-32S#show ip pim dense-mode interface
IP Address Interface Mode state Nbr count
---------------- ------------ ----- -------- ----------
10.90.90.90 vlan1 DM Enabled 0
Total Entries: 1
DXS-3600-32S#
Example
This example shows how to display the detailed information of PIM-DM interface
‘vlan1’.
DXS-3600-32S#show ip pim dense-mode interface vlan1 detail
Interface Name: vlan1
Address 10.90.90.90, DR 10.90.90.90
Hello period 30 seconds, Next hello in 29 seconds
Neighbor:
10.2.0.2
10.2.0.5
DXS-3600-32S#
Display Parameters Description
IP Address The IP Address of the interface displayed.
Interface The name of the interface.
Mode The mode of PIM of this interface, To change mode of PIM, use the ip pim
command.
state The PIM-DM state of this interface.
Nbr count The numbers of neighbors connected to this interface in the LAN.
Neighbor The address of the neighbors.
DR The DR address of this LAN.
IFNAME Specifies the interface to display the neighbor. If no IFNAME specified, all interface’s
neighbor would be displayed.
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 3. (EI Mode Only Command)
Usage Guideline
Use this command to display the neighbor information of PIM. Both PIM-SM and
PIM-DM neighbor would be displayed.
Loading ...
Loading ...
Loading ...