Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
638
69-8 debug vrrp
This command is used to turn on the VRRP debug function. Use the no form of the command to turn off the VRRP
debug function.
debug vrrp
no debug vrrp
69-9 debug vrrp errors
This command is used to turn on the VRRP error prompt debug switch. Use the no form of the command to turn off the
VRRP error prompt debug switch.
debug vrrp errors
no debug vrrp errors
Example
This example shows detailed information about group 1 on interface ‘vlan1’.
DXS-3600-32S#show vrrp interface vlan1 group 1
vlan1 – Group 1
State is Master
Virtual IP Address is 10.1.1.1
Virtual MAC Address is 00-00-5E-00-01-01
Advertisement Interval is 1 seconds
Preemption is enabled
Priority is 255
Master Router is 10.1.1.1
DXS-3600-32S#
Display Parameters Description
Interface Interface name the virtual routers belong to.
Grp Group ID, the identifier of virtual router, as specified with the vrrp ip command.
Pri The priority of virtual router, as specified with the vrrp priority command.
Own “Y” represents IP address owner.
Pre The preempt mode of virtual router, as specified with the vrrp preempt command.
“Y” represents the preempt mode is enabled.
State State of this virtual router, which could be Master, Backup or Init.
Master addr The IP address of the interface that the Master virtual router belongs to.
Group addr The IP address of virtual router, as specified with the vrrp ip command.
Parameters
None.
Default
By default the VRRP debug is turned off.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 8. (EI Mode Only Command)
Usage Guideline
Use this command to turn on or turn off the VRRP debug function.
Example
This example shows how to turn on the VRRP debug function.
DXS-3600-32S#debug vrrp
DXS-3600-32S#
Parameters
None.
Loading ...
Loading ...
Loading ...