Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
427
43-12 port_mode
This command is used to configure the port mode of DXS-3600-EM-4QXS ports.
port_mode {[1st_port | 2nd_port | 3rd_port | 4th_port]} {4*10g | 40g}
Parameters
Command Default Level
Level: 1
Usage Guideline
This command displays the hot swapping expansion module information.
Example
This example show how to view the hot swapping expansion module information.
DXS-3600-32S#show module-info
Boot-UP Expansion Module (n) :DXS-3600-EM-4XT
Equipped Expansion Module (n) :DXS-3600-EM-4QXS
1st port mode:40G
2nd port mode:40G
3rd port mode:4*10G
4th port mode:4*10G
4QXS Port Mode Configuration:
1st port mode:40G
2nd port mode:40G
3rd port mode:40G
4th port mode:40G
DXS-3600-32S#
1st_port Specifies to the configure the first port mode.
2nd_port Specifies to the configure the second port mode.
3rd_port Specifies to the configure the third port mode.
4th_port Specifies to the configure the fourth port mode.
4*10g Specifies to the configure the all the port modes.
40g Specifies to the configure the 40 Gigabit port mode.
Default
None.
Command Mode
Configuration Mode.
Command Default Level
Level: 15
Usage Guideline
This command configures the port mode to DXS-3600-EM-4QXS. This command
only works when executing the command copy configuration to flash when the
boot up module and current equipped module is DXS-3600-EM-4QXS.
Example
This command configure the port mode of DXS-3600-EM-4QXS ports. The port
mode can be set as 40g port and 4*10G port.
DXS-3600-32S(config)#port_mode 1st_port 4*10g
DXS-3600-32S(config)#
Loading ...
Loading ...
Loading ...