Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
34
3-19 show ip access-group
This command is used to display the IP ACL configuration of the interface.
show ip access-group [interface interface]
Parameters
3-20 show ipv6 access-group
This command is used to display the IPv6 ACL configuration of the interface.
show ipv6 traffic-filter [interface interface]
Parameters
Example
This example shows how to display the ACL, applied to the interface.
DXS-3600-32S#show access-group
Interface tenGigabitEthernet 1/0/2:
ipv6 access-group ipv6-11 in
ipv6 access-group ipv6-1 out
expert access-group exp1 in
Interface tenGigabitEthernet 1/0/11:
ip access-group 11 in
ip access-group std-ip-1 out
mac access-group 6005 in
mac access-group ext-mac-6000 out
DXS-3600-32S#
interface interface Specifies the interface ID used.
Default
None.
Command Mode
EXEC Mode.
Command Default Level
Level: 1
Usage Guideline
Displays the IP ACL applied to the interface. If no interface is specified, the IP ACLs
applied to all the interfaces will be displayed.
Example
This example shows how to display the IP ACL, applied to the interface.
DXS-3600-32S#show ip access-group
Interface tenGigabitEthernet 1/0/11:
ip access-group 11 in
ip access-group std-ip-1 out
DXS-3600-32S#
interface interface Specifies the interface ID used.
Default
None.
Command Mode
EXEC Mode.
Command Default Level
Level: 1
Usage Guideline
Displays the IPv6 ACL applied to the interface. If no interface is specified, the IPv6
ACLs applied to all the interfaces will be displayed.
Loading ...
Loading ...
Loading ...