Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
519
52-15 timers basic
This command is used to configure RIP timers. Use the no form of this command to restore to the default value.
Example
This example shows how to check the settings of all RIP interfaces.
DXS-3600-32S#show ip rip interface
RIP Interface Settings
Interface Name: vlan1 IP Address: 10.90.90.90/8 (Link Up)
Interface Metric: 1 Administrative State: Enabled
TX Mode: V1 Broadcast RX Mode: V1 or V2
Authentication: Enabled
Password for Authentication: 1234
Distribute List In: map1
Interface Name: vlan2 IP Address: 172.18.1.1/24 (Link Down)
Interface Metric: 1 Administrative State: Disabled
TX Mode: V1 Broadcast RX Mode: V1 or V2
Authentication: Disabled
Distribute List In: None
Total Entries : 2
DXS-3600-32S#
Example
This example shows how to check settings of all RIP interfaces in VRF VPN-A.
DXS-3600-32S#show ip rip interface vrf VPN-A
RIP Interface Settings
Interface Name: ip100 IP Address: 100.1.1.1/24 (Link Up)
Interface Metric: 1 Administrative State: Disabled
TX Mode: V1 Broadcast RX Mode: V1 or V2
Authentication: Disabled
Total Entries : 1
DXS-3600-32S#
Display Parameters Description
Interface Name The name of RIP interfaces.
IP Address The IP address of RIP interfaces.
Interface Metric The metric used by RIP interfaces to send update.
Administrative State Administrative state of RIP interfaces. It is specified with the network command.
TX Mode The version of RIP packets sent on the interface. It is specified with the ip rip send
version command, the ip rip send enable command and the version command.
RX Mode The version of RIP packets received on the interface. It is specified with the ip rip
receive version command, the ip rip receive enable command and the version
command.
Authentication The authentication type of RIP interfaces. It is specified with the ip rip
authentication mode command.
Password for Authentication The plain text password. It is specified with the ip rip authentication text-password
command.
Distribute List In Access list name used as distribute-list in list. It is specified with the distribute-list in
command.
Total Entries The total value of RIP interfaces.
Loading ...
Loading ...
Loading ...