Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
461
47-16 show ip pim sparse-mode interface
This command is used to display PIM-SM interface information.
show ip pim sparse-mode interface [IFNAME [detail]]
Parameters
BSR Priority Priority as configured in the ip pim bsr-candidate command.
Role The role of our CBSR.
Priority Priority of our CBSR.
Hash mask length Length of a mask (32 bits maximum) that is to be ANDed with the group address
before the hash function is called. This value is configured in the ip pim bsr-
candidate command.
state State of this switch (elected or not).
Next
Cand_RP_advertisement in
Time in hours, minutes, and seconds in which the next candidate rendezvous-point
advertisement will be sent.
Next bootstrap message in Time in hours, minutes, and seconds in which the next bootstrap message is due
from this BSR.
Holdtime The hold time of the candidate RP, this value is configured by ip pim rp-candidate
Candidate RP Candidate RP information of this switch.
IFNAME Specifies the interface to display the neighbor. If no IFNAME specified, all interface’s
neighbor would be displayed.
detail Displayd the detail information of interface.
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 3. (EI Mode Only Command)
Usage Guideline
Use to display PIM-SM interface information.
Example
This example shows all PIM-SM interface information.
DXS-3600-32S#show ip pim sparse-mode interface
IP Address Interface Mode state Nbr count
---------------- ------------ ----- -------- ----------
10.90.90.90 vlan1 SM Enabled 1
172.18.63.1 vlan2 SM Enabled 2
Total Entries: 2
DXS-3600-32S#
Display Parameters Description
Loading ...
Loading ...
Loading ...