Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
419
Peripheral Commands
42-1 show system-info
This command is used to show system information.
show system-info
42-2 show device-status
This command is used to show the device status.
show device-status
Parameters
None.
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 3
Usage Guideline
This command shows the system information.
Example
This example shows how to show the system information.
DXS-3600-32S#show system-info
Device Type : DXS-3600-32S TenGigabit Ethernet Switch
MAC Address : 00-01-02-03-04-00
IP Address : 0.0.0.0 (Manual)
VLAN Name : default
Subnet Mask : 0.0.0.0
Default Gateway : 0.0.0.0
Boot PROM Version : Build 1.10.007
Firmware Version : Build 1.10.023
Hardware Version :
Firmware Type : EI
Serial Number : D1234567890
System Name :
System Location :
System Uptime : 0 days, 0 hours, 0 minutes, 41 seconds
System Contact :
DXS-3600-32S#
Parameters
None.
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 3
Usage Guideline
This command shows the device’s status about the temperature, fan and power. It
includes the temperature log state. This command also shows the working state of
the power and fan.
Loading ...
Loading ...
Loading ...