Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
10
2-8 dot1x re-authenticate
This command is used to reauthenticate a specific port or a specific MAC address.
dot1x re-authenticate {interface <interface-id> | mac-address <mac-address>}
Parameters
2-9 dot1x initialize
This command is used to initialize the authenticator state machine on a specific port or associated with a specific MAC
address.
dot1x initialize {interface <interface-id> | mac-address H.H.H}
Parameters
Usage Guideline
You can configure the number of seconds between reauthentication attempts by
using the ‘dot1x timeout reauth-period’ command.
Example
This example shows how to enable periodic reauthentication on Ethernet port 1.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#interface tenGigabitEthernet 1/0/1
DXS-3600-32S(config-if)#dot1x reauthentication
DXS-3600-32S(config-if)#
interface <interface-id> (Optional) Specifies a port to reauthenticate. Valid interfaces are physical ports.
mac-address <mac-
address>
(Optional) Specifies a MAC address to re-authenticate. The function can be used
only if the authentication mode is host-based.
Default
This command has no default value.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 8
Usage Guideline
Under port-based mode, use the parameter interface <interface-id> to re-
authenticate a specific port. Under host-based mode, use the parameter mac-
address <mac-address> to reauthenticate a specific MAC address.
Example
This example shows how to reauthenticate Ethernet port 1.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#dot1x re-authenticate interface tenGigabitEthernet 1/0/1
DXS-3600-32S(config)#
interface <interface-id> (Optional) Specifies a port on which the authenticator state machine will be
initialized. Valid interfaces are physical ports.
mac-address H.H.H (Optional) Specifies a MAC address with which the authenticator state machine
associates will be initialized. The function can be used only if the authentication
mode is host-based.
Default
None.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 8
Loading ...
Loading ...
Loading ...