Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
133
7-78 show ip bgp dampening parameters
This command is used to display the BGP dampening configuration.
show ip bgp dampening parameters [vrf VRF-NAME]
Parameters
vrf VRF-NAME (Optional) Specifies the VRF name. The length of the VRF-NAME is 12 characters.
Default
None.
Command Mode
Privileged Mode.
Command Default Level
Level: 3. (EI Mode Only Command)
Usage Guideline
Use this command to display the dampening parameters of BGP.
Example
This example shows how to display the dampening configuration information by
using the show ip bgp dampening parameters command, in privileged mode.
DXS-3600-32S#show ip bgp dampening parameters
BGP Dampening Parameter for IPv4 Unicast
------------------------------------------
BGP Dampening State : Disabled
BGP Dampening Route Map :
Half-life Time : 15 mins
Reuse Value : 750
Suppress Value : 2000
MAX Suppress Time : 60 mins
Unreachable route's Half-life : 15 mins
DXS-3600-32S#
Example
The following example is to show the dampening configuration information by using
the show ip bgp dampening parameters vrf command in privileged mode.
DXS-3600-32S#show ip bgp dampening parameters vrf VPN-A
BGP Dampening for vrf : VPN-A
---------------------------------------------------------
BGP Dampening State : Disabled
BGP Dampening Route Map :
Half-life Time : 15 mins
Reuse Value : 750
Suppress Value : 2000
MAX Suppress Time : 60 mins
Unreachable route's Half-life : 15 mins
DXS-3600-32S#
Display Parameters Description
BGP Dampening State Specifies the BGP dampening function’s state.
BGP Dampening Route Map The route map here is to set the dampening.
Half-Life Time Specifies the time (in minute) after which the penalty of the reachable routes will be
down, by half. The default setting is 15 minutes.
Reuse Value If the penalty for a flapping route decreases enough to fall below this value, the route
is unsuppressed. The default setting is 750
Loading ...
Loading ...
Loading ...