Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
644
70-3 show vlan mapping profile
This command is used to display previously configured VLAN mapping profile information.
show vlan mapping profile [ID]
Parameters
70-4 switchport vlan mapping profile
This command is used to apply the VLAN mapping rules of profile to specified interface. Use no switchport vlan-
mapping profile command to remove the application.
switchport vlan mapping profile ID
no switchport vlan mapping profile ID
Parameters
ID (Optional) Specifies the ID of the VLAN mapping profile. If not specified, all
configured VLAN mapping profiles will be displayed..
Default
None.
Command Mode
EXEC Mode.
Command Default Level
Level: 3
Usage Guideline
Use this command to display previously configured VLAN mapping profile
information.
Example
This example shows all VLAN mapping profile information.
DXS-3600-32S#show vlan mapping profile
VLAN mapping profile:1 type:ethernet
rule 10 match src-ip 100.1.1.0/24, dot1q-tunnel outer-vid 100
rule 20 match dst-ip 200.1.1.0/24, dot1q-tunnel outer-vid 200
rule 30 match src-ip 300.1.1.0/24, dot1q-tunnel outer-vid 300
VLAN mapping profile 2: type:ethernet
rule 10 match src-mac 00-00-00-00-00-01, translate outer-vid 40
rule 20 match outer-vid 5, translate outer-vid 10
Total Entries: 2
DXS-3600-32S#
ID Specifies the VLAN mapping profile ID.
Default
None.
Command Mode
Interface Configuration Mode.
Command Default Level
Level: 12
Loading ...
Loading ...
Loading ...