Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
255
22-9 show gvrp statistics
This command is used to display the statistics for a GVRP port.
show gvrp statistics [interface INTERFACE-ID [, | -]]
Parameters
Command Mode
EXEC Mode.
Command Default Level
Level: 3
Usage Guideline
This command only displays GVRP related configurations.
Example
This example shows how to display the GVRP configuration for all interfaces.
DXS-3600-32S#show gvrp
Global GVRP State : Enabled
Dynamic VLAN Creation : Enabled
DXS-3600-32S#
Example
This example shows how to display the GVRP configuration on Ethernet ports 1-2.
DXS-3600-32S#show gvrp interface tenGigabitEthernet 1/0/1-1/0/2
TGi1
GVRP Status : Disabled
Join Time : 20 centiseconds
Leave Time : 60 centiseconds
Leave-All Time : 500 centiseconds
Advertise VLAN : 1-4094
TGi2
GVRP Status : Disabled
Join Time : 20 centiseconds
Leave Time : 60 centiseconds
Leave-All Time : 1000 centiseconds
Advertise VLAN : 1-4094
DXS-3600-32S#
INTERFACE-ID (Optional) Specifies the interface to display. If no interface is specified, the statistics
on all interfaces will be shown.
, (Optional) Specifies a series of interfaces, or separate a range of interfaces from a
previous range.
- (Optional) Specifies a range of interfaces.
Default
None.
Command Mode
EXEC Mode.
Command Default Level
Level: 3
Usage Guideline
This command only displays the ports which have the GVRP state enabled.
Loading ...
Loading ...
Loading ...