Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
229
show hosts [vrf <string 1-12>]
Parameters
17-6 ip dns server
This command is used to control if the switch can use the domain name for other dns clients which are connected to it.
If the DNS server state is enabled, when it recevies a DNS query, it will according to its DNS cache table or query an
upper DNS server to respond to the client. Us the no form of this command to disable this function.
ip dns server
no ip dns server
vrf <string 1-12> Specifies the VRF that the host reside in. If no VRF name specified, the global
instance will be used.
Default
None.
Command Mode
Privileged Mode.
Command Default Level
Level: 2
Usage Guideline
Show the DNS related configuration information.
Example
This example shows how to show the DNS related configuration information.
DXS-3600-32S#show hosts
Name servers are: 192.168.5.134
Static Host Name Table
Host Name IP Address
------------------------------------- ---------------
www.abc.com 192.168.5.243
Total Static Entries: 1
Dynamic Host Name Table
Host Name IP Address TTL
------------------------------------- --------------- ---------
www.yes.com 10.0.0.88 1334 minutes
Total Dynamic Entries: 1
DXS-3600-32S#
Parameters
None.
Default
By default, this option is disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 8
Usage Guideline
This command enables the domain name server function.
Example
This example shows how to enable the DNS domain name server function.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#ip dns server
DXS-3600-32S(config)#
Loading ...
Loading ...
Loading ...