Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
580
59-5 password
This command is used to create a password used on the line interface. The no form of this command will disable the
use of a password.
password {password | encrypted encrypted-password}
no password
Parameters
59-6 login (Line)
This command is used to configure the line login method
login
no login
59-7 enable
This command is used to enter a privilege level.
enable [privilege-level]
password Specifies to identify the plain text password.
encrypted Specifies to identify that the password entered is encrypted.
encrypted-password Specifies the encrypted pasword password used. This password must be between 1
to 26 characters long. Leading spaces will be ignored and spaces in between or at
the end are regarded as part of the password.
Default
By default, there is no password specified.
Command Mode
Line Configuration Mode.
Command Default Level
Level: 15
Usage Guideline
None.
Example
This example shows how to create a password of ‘12345’.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#line console
DXS-3600-32S(config-line)#password 12345
DXS-3600-32S(config-line)#
Parameters
None.
Default
By default, no login is configured.
Command Mode
Line Configuration Mode.
Command Default Level
Level: 15
Usage Guideline
None.
Example
This example shows how to use the line login command.
DXS-3600-32S(config-line)#login
DXS-3600-32S(config-line)#
Loading ...
Loading ...
Loading ...