Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
298
29-5 show ip multicast interface
This command is used to display the basic multicast information of an interface.
show ip multicast interface [IFNAME]
Usage Guideline
This command is used to display the RPF information of the specified source
address. The static multicast routing information, which created by command ip
mroute, prefer than RPF information learnt by unicast routing protocol.
Example
This example shows how to display RPF information of 10.0.0.1
DXS-3600-32S#show ip rpf 10.0.0.1
Source IP:10.0.0.1
RPF interface: vlan1
RPF type: unicast
metric: 1
DXS-3600-32S#
Example
This example shows how to display RPF information of 20.0.0.1
DXS-3600-32S#show ip rpf 20.0.0.1
Source IP:20.0.0.1
RPF interface: vlan3
RPF type: unicast
metric: 4
DXS-3600-32S#
Example
This example shows how to display RPF information for 30.0.0.1
DXS-3600-32S#show ip rpf 30.0.0.1
Source IP:30.0.0.1
RPF interface: vlan2
RPF type: unicast
metric: 2
DXS-3600-32S#
Example
This example shows how to display RPF information of 172.18.61.8
DXS-3600-32S#show ip rpf 172.18.61.8
Source IP:172.18.61.8
RPF address: 192.18.16.1
RPF type: Static
DXS-3600-32S#
Display Parameters Description
Source IP Indicate the source IP address.
RPF interface Indicate the RPF interface name for the specified source address.
Type Specify the way the switch gets the RPF information. It can be unicast routing
protocol or static configured.
Metric The metric to achieve to the source network from the local switch.
RPF address Specify RPF neighbor address, created by command “ip mroute”.
Loading ...
Loading ...
Loading ...