Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
146
7-83 show ip bgp network
This command is used to display networks created by Border Gateway Protocol network command.
show ip bgp network [vrf VRF-NAME] [NETWORK-ADDRESS]
Parameters
Accepted Prefixes Number of routes accepted by the local BGP. These routes are contained in the Loc-
RIB.
Last read Time that BGP last received a message from this neighbor. Format is HH:MM:SS.
Send Statistics The statistics information of the outgoing packets.
Opens (send) Number of OPEN packets sent to the neighbor.
Notifications (send) Number of NOTIFICATIONS packets sent to the neighbor.
Updates (send) Number of UPDATES packets sent to the neighbor.
Keepalives (send) Number of KEEPALIVES packets sent to the neighbor.
Route Refresh (send) Number of ROUTEREFRESH packets sent to the neighbor.
Total (send) Total packets sent to the neighbor.
Receive Statistics The statistics information of the incoming packets.
Opens (receive) Number of OPEN packets received from the neighbor.
Notifications (receive) Number of NOTIFICATIONS packets received from the neighbor.
Updates (receive) Number of UPDATES packets received from the neighbor.
Keepalives (receive) Number of KEEPALIVES packets received from the neighbor.
Route Refresh (receive) Number of ROUTEREFRESH packets received from the neighbor.
Total (receive) Total packets received from the neighbor.
Connections Established Number of times that the local BGP establish the TCP connection with the neighbor.
Connections Dropped Number of times that the TCP connection been dropped.
Local Host IP address of the local BGP.
Local Port TCP port of the local BGP.
Remote Host IP address of the neighbor.
Remote Port TCP port of the neighbor.
Due Time for Next Start
Timer
BGP peer auto re-start timer value next time. Seconds.
Due Time for Next Connect
Timer
BGP peer re-connect timer value next time when peer session connect fail.
Seconds.
vrf VRF-NAME (Optional) Specifies the VRF name. The length of the VRF-NAME is 12 characters.
NETWORK-ADDRESS Specifies the IP network address. If a specific network address is not specified, all IP
addresses will be displayed.
Default
None.
Command Mode
Privileged Mode.
Command Default Level
Level: 3. (EI Mode Only Command)
Usage Guideline
This command displays the networks advertised by BGP.
Display Parameters Description
Loading ...
Loading ...
Loading ...