Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
321
32-18 show lldp local interface
This command is used to display the LLDP of each physical interface information currently available for populating
outbound LLDP advertisements.
show lldp local interface interface-id [, | -] {brief | normal | detail}
Parameters
Example
This example shows the output from the show lldp interface command. To display a
specific physical interface configuration.
DXS-3600-32S#show lldp interface tenGigabitEthernet 1/0/1
Interface ID : 1/0/1
-----------------------------------------------------------------
Admin Status : TX_and_RX
Notification Status : Disabled
Advertised TLVs Option :
Port Description Disabled
System Name Disabled
System Description Disabled
System Capabilities Disabled
Enabled Management Address
(None)
Port VLAN ID Disabled
Enabled Port_and_Protocol_VLAN_ID
(None)
Enabled VLAN Name
(None)
Enabled Protocol_Identity
(None)
MAC/PHY Configuration/Status Disabled
Link Aggregation Disabled
Maximum Frame Size Disabled
DXS-3600-32S#
interface interface-id Specifies the valid physical interface.
, (Optional) Specifies a series of interfaces, or separate a range of interfaces from a
previous range. No space before and after the comma.
- (Optional) Specifies a range of interfaces. No space before and after the hyphen.
brief Displays the information in brief mode.
normal Displays the information in normal mode. This is the default display mode.
detailed Displays the information in detailed mode.
Default
None.
Command Mode
User EXEC Mode.
Command Default Level
Level: 3
Usage Guideline
This command displays the LLDP of each physical interface information currently
available for populating outbound LLDP advertisements.
Loading ...
Loading ...
Loading ...