Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
623
67-9 show mac-address-table vpls
This command is used to display VPLS MAC address information.
show mac-address-table vpls [VPLS-NAME [{peer IP-ADDRESS [VC-ID] | ac interface INTERFACE-ID [vlan
VLAN-ID]}]] [address MAC-ADDR]
Parameters
Example
This example shows how to display detailed information for a VPLS with PW
redundancy.
DXS-3600-32S#show vpls vpls102 detail
VPLS Name: vpls102, Operate Status: Up
VPLS ID: 102, Service Type: Tagged, MTU: 1500
Peers via Pseudowires:
VC ID Peer Type Oper Status
---------- --------------- ------- -----------
100 1.1.1.1 Primary Up
100 2.2.2.2 Backup Standby
Local ACs:
Local AC Oper Status
----------------- -----------
Eth1/0/17/VLAN102 Up
Total Entries: 1
DXS-3600-32S#
VPLS-NAME (Optional) Specifies the VPLS name. This name can be up to 32 characters long.
peer (Optional) Specifies a peer in a VPLS.
IP-ADDRESS (Optional) Specifies the LSR ID that is used to identify the PE which the peer is
belongs to.
VC-ID (Optional) Specifies the pseudowire ID. This ID must be between 1 and 4294967295.
ac (Optional) Specifies a local AC in a VPLS.
interface INTERFACE-ID (Optional) Specifies the Ethernet interface of a local AC.
vlan VLAN-ID (Optional) Specifies that a local AC is an Ethernet VLAN-based AC and the related
VLAN ID. If not specified, the local AC will be an Ethernet-based AC.
address MAC-ADDR (Optional) Specifies to display the MAC address.
Default
None.
Command Mode
EXEC Mode.
Command Default Level
Level: 3.
Usage Guideline
This command is used to display VPLS MAC address information. A user can select
to display a specified VPLS MAC address, or the VPLS MAC addresses on a
specified VPLS peer, or the VPLS MAC addresses on a specified VPLS AC, or the
VPLS MAC addresses on a specified VPLS, or all VPLS MAC addresses.
Loading ...
Loading ...
Loading ...