Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
11
2-10 dot1x system-auth-control
This command is used to globally enable IEEE 802.1X authentication on the switch. Use the no form of this command
to disable IEEE 802.1X function.
dot1x system-auth-control
no dot1x system-auth-control
2-11 dot1x system-max-user
This command is used to configure the maximum number of users that can be learned via 802.1X authentication. Use
the no form of this command to reset to the defaulting settings.
dot1x system-max-user <int 1-4096>
no dot1x system-max-user
Parameters
Usage Guideline
Under port-based mode, use the parameter interface <interface-id> to initialize a
specific port. Under host-based mode, use the parameter mac-address <mac-
address> to initialize a specific MAC address.
Example
This example shows how to initialize the authenticator state machine on Ethernet
port 1.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#dot1x initialize interface tenGigabitEthernet 1/0/1
DXS-3600-32S(config)#
Parameters
None.
Default
802.1X is disabled globally by default.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 8
Usage Guideline
Use this command to enable 802.1X authentication globally.
Example
This example shows how to enable IEEE 802.1X authentication on the switch.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#dot1x system-auth-control
DXS-3600-32S(config)#
<int 1-4096> Specifies the maximum number of users.
Default
By default, the maximum number of users that can be learned via 802.1X
authentication is 4096.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 8
Usage Guideline
The setting is a global limitation on the maximum number of users that can be
learned via 802.1X authentication. In addition to the global limitation, the maximum
number of users per port is also limited.
Loading ...
Loading ...
Loading ...