Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
9
2-6 dot1x max-req
This command is used to configure the maximum number of times that the backend authentication state machine will
retransmit an Extensible Authentication Protocol (EAP) request frame to the supplicant before restarting the
authentication process. Use the no form of this command to reset the maximum number of times to its default value.
dot1x max-req <int 1-10>
no dot1x max-req
Parameters
2-7 dot1x reauthentication
This command is used to enable periodic reauthentication. Use the no form of this command to return to disable
periodic reuthentication.
dot1x reauthentication
no dot1x reauthentication
Example
This example shows how to configure the quiet period, reauthentication period,
server timeout value, supplicant timeout value, and transmission period for Ethernet
port 1 to be 20, 1000, 15, 15, and 10 seconds, respectively.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#interface tenGigabitEthernet 1/0/1
DXS-3600-32S(config-if)#dot1x timeout quiet-period 20
DXS-3600-32S(config-if)#dot1x timeout reauth-period 1000
DXS-3600-32S(config-if)#dot1x timeout server-timeout 15
DXS-3600-32S(config-if)#dot1x timeout supp-timeout 15
DXS-3600-32S(config-if)#dot1x timeout tx-period 10
DXS-3600-32S(config-if)#
max-req <int 1-10> Number of times that the switch retransmits an EAP frame to the supplicant before
restarting the authentication process. The range is 1 to 10.
Default
The default value is 2 times.
Command Mode
Interface Configuration Mode.
Command Default Level
Level: 8
Usage Guideline
This command is used to set the maximum number of times that the backend
authentication state machine will retransmit an Extensible Authentication Protocol
(EAP) request frame to the supplicant before restarting the authentication process.
Example
This example shows how to set the maximum number of retries allowed on port 1.
The maximum number of retries is set to 3.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#interface tenGigabitEthernet 1/0/1
DXS-3600-32S(config-if)#dot1x max-req 3
DXS-3600-32S(config-if)#
Parameters
None.
Default
The periodic reauthentication on interface is disabled by default.
Command Mode
Interface Configuration Mode.
Command Default Level
Level: 8
Loading ...
Loading ...
Loading ...