Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
157
7-91 show ip community-list
This command is used to display configured community lists.
show ip community-list [COMMUNITY-LIST-NAME]
Parameters
Ver BGP protocol version. And now, value is 4.
AS The peer’s Autonomous system number.
MsgRcvd The number of message which receives form this neighbor.
MsgSent The number of message which be sent to this neighbor.
Up/Down The length of time that the BGP session has been in the Established state, or the
current status if not in the Established state.
State/PfxRcd The current state of the BGP session, or the number of prefixes that have been
received from a neighbor or peer group. When the maximum number (as set by the
neighbor maximum-prefix command) is reached, the string “PfxRcd” appears in
the entry, the neighbor is shut down, and the connection is set to Idle. An (Admin)
entry with Idle status indicates that the connection has been shut down using the
neighbor shutdown command.
COMMUNITY-LIST-NAME Specifies the community list name. The maximum length is 16 characters.
Default
None.
Command Mode
Privileged Mode.
Command Default Level
Level: 3. (EI Mode Only Command)
Usage Guideline
This command can be used without any arguments or keywords. If no arguments are
specified, this command will display all community lists. However, the community list
name can be specified when entering the show ip community-list command. This
option can be useful for filtering the output of this command and verifying a single
named community list.
Display Parameters Description
Loading ...
Loading ...
Loading ...