Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
581
Parameters
59-8 disable
This command is used to leave a privilege level.
disable [privilege-level]
Parameters
59-9 enable password
This command is used to create a privilege level password.
enable password [level privilege-level] {password | encrypted encrypted-password}
no enable password [level privilege-level]
Parameters
privilege-level Specifies the privilege level used. If this value is not specified, then the default
privilege level value will be used.
Default
The default privilege level is 15.
Command Mode
EXEC Mode.
Command Default Level
Level: 1
Usage Guideline
When a user finds that some commands cannot be executed because the current
level is lower than command’s required level, the user can use this command to login
to a higher level. If the privilege level have a password configured, the user needs to
input the required password before access to the higher privilege level will be given.
If the user inputs the incorrect password three times, the switch will stop requesting
the user to input the password and return to current privilege level.
Example
This example shows how to enable the privilege level of 15.
DXS-3600-32S>enable 15
DXS-3600-32S#
privilege-level Specifies the privilege level used. If this value is not specified, then the default
privilege level value will be used.
Default
The default privilege level is 1.
Command Mode
EXEC Mode.
Command Default Level
Level: 1
Usage Guideline
None.
Example
This example shows how to leave the privilege level.
DXS-3600-32S#disable
DXS-3600-32S>
level privilege-level Specifies the privilege level used. If not specified, the privilege level will set to 15.
password Specifies that a plain text password will be used.
encrypted Specifies that the password will be encrypted.
Loading ...
Loading ...
Loading ...