Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
126
7-73 show ip bgp cidr-only
This command is used to display routes with classless inter-domain routing (CIDR).
show ip bgp cidr-only [{all | rd ASN:NN | vrf VRF-NAME}]
Parameters
Example
This example shows the output from the show ip bgp aggregate command, in
privileged mode.
DXS-3600-32S#show ip bgp aggregate
Network Address Options
------------------ -------------------
100.0.0.0/8 -
200.0.0.0/10 summary-only
Total Aggregate Address Number: 2
DXS-3600-32S#show ip bgp aggregate vrf VPN-A
Network Address VRF-Name Options
--------------------------------------------------------------------------
5.5.5.0/24 VPN-A -
100.0.0.0/8 VPN-A summary-only
Total Aggregate Address Number: 2
DXS-3600-32S#
Display Parameters Description
Network Address IP prefix with its mask length of the entry.
VRF-Name Specifies the VRF name of the aggregate routes.
Options May be ‘as-set’ or ‘summary-only’.
Total Aggregate Address
Number
The aggregate network number.
all (Optional) Specifies to display routes of all VPN and VRFs.
rd ASN:NN (Optional) Specifies to display routes with the specified Route Distinguisher. The
ASN:NN can be IP address:number or AS number:number.
vrf VRF-NAME (Optional) Specifies the VRF name. The length of the VRF-NAME is 12 characters.
Default
None.
Command Mode
Privileged Mode.
Command Default Level
Level: 3. (EI Mode Only Command)
Usage Guideline
This command is used to display BGP routes with classless inter-domain routing
(CIDR).
Loading ...
Loading ...
Loading ...