Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
425
Parameters
43-9 snmp trap link-status
This command is used to specify the SNMP trap-link status.
snmp trap link-status
no snmp trap link-status
43-10 show interface
This command is used to display interface information.
show interface [{tenGigabitEthernet <portlist>}] [{description | status | switchport}]
Parameters
64-12288 Specifies to set the Maximum Transmission Unit value. This value must be between
64 and 12288.
Default
The default MTU value is 1536.
Command Mode
Port Configuration Mode.
Command Default Level
Level: 15
Usage Guideline
This command is used to specify the Maximum Transmission Unit (MTU) of the port.
Example
This example shows how to specify the Maximum Transmission Unit (MTU) of the
port.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#interface tenGigabitEthernet 1/0/1
DXS-3600-32S(config-if)#mtu 1234
DXS-3600-32S(config-if)#exit
DXS-3600-32S(config)#interface range tenGigabitEthernet 1/0/1-1/0/10
DXS-3600-32S(config-if-range)#no mtu
DXS-3600-32S(config-if-range)#
Parameters
None.
Default
By default, this option is enabled.
Command Mode
Port Configuration Mode.
Command Default Level
Level: 15
Usage Guideline
To set the port interface send trap when port interface link changes. The no form, of
this command, means not to send traps when a port interface link changes.
Example
This example shows how to specify the SNMP trap-link status.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#interface tenGigabitEthernet 1/0/1
DXS-3600-32S(config-if)#snmp trap link-status
DXS-3600-32S(config-if)#exit
DXS-3600-32S(config)#interface range tenGigabitEthernet 1/0/1-1/0/10
DXS-3600-32S(config-if-range)#no snmp trap link-status
DXS-3600-32S(config-if-range)#
portlist Specifies the range of ports that will be displayed.
description Specifies the interface description, including the link status.
Loading ...
Loading ...
Loading ...