D-Link DXS-3600-32S 24-port Top Of Rack 10 Gigabit Managed Switch With Expansion Slot

User Manual - Page 452

For DXS-3600-32S.

PDF File Manual, 695 pages, Read Online | Download pdf file

DXS-3600-32S photo
Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
444
46-7 show ip route-preference
This command is used to display the preference of different route types.
show ip route-preference [vrf vrf-name] [{connected | static | default | rip | ospf | ospfIntra | ospfInter |
ospfExt1 | ospfExt2 | ebgp | ibgp}]
Parameters
vrf vrf-name (Optional) Specifies to show the route preference of the VRF routing table.
connected (Optional) Specifies to show the route preference of connected route.
static (Optional) Specifies to show the route preference of static route.
default (Optional) Specifies to show the route preference of static default route.
rip (Optional) Specifies to show the route preference of RIP route.
ospf (Optional) Specifies to show the route preference of all types of OSPF route.
ospfIntra (Optional) Specifies to show the route preference of OSPF intra-area route.
ospfInter (Optional) Specifies to show the route preference of OSPF inter-area route.
ospfExt1 (Optional) Specifies to show the route preference of OSPF external type-1 route.
ospfExt2 (Optional) Specifies to show the route preference of OSPF external type-2 route.
ebgp (Optional) Specifies to show the route preference of BGP AS-external route.
ibgp (Optional) Specifies to show the route preference of BGP AS-internal route.
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 3
Usage Guideline
In general, the higher the preference is, the lower the trust rating is. So, if there are
two routes to a same destination, the source with lower preference will be selected to
forward.
The preference for connected routes is fixed to 0. This means the connected route
always has the highest priority.
Example
This example shows how to check the route preference of all route types.
DXS-3600-32S#show ip route-preference
Route Preference Settings
Protocol Preference
---------- ----------
RIP 100
Static 100
Default 100
Connected 0
OSPF Intra 80
OSPF Inter 90
OSPF ExtT1 110
OSPF ExtT2 115
EBGP 70
IBGP 130
DXS-3600-32S#
Loading ...
Loading ...
Loading ...