Loading ...
Loading ...
Loading ...
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
313
32-8 lldp notification
This command is used to enable the SNMP trap notification of LLDP data changes detected on advertisements
received from neighbor devices on each physical interfaces. Use the no form of this command to return to the default
settings.
lldp notification
no lldp notification
32-9 lldp management-address
This command is used to enable the physical interface that is specified for advertising indicated management address
instance. Use the no form of this command to return to the default settings.
lldp management-address {ipv4 ip-address}
no lldp management-address {ipv4 ip-address}
Parameters
Parameters
None.
Default
LLDP state of each physical interface is disabled.
Command Mode
Interface Configuration Mode.
Command Default Level
Level: 12
Usage Guideline
Enable or disable each physical interface for sending change notifications to
configured SNMP trap receiver(s) if an LLDP data change is detected in an
advertisement received on the physical interface from an LLDP neighbor. The
definition of change includes new available information, information timeout, and
information updates. The changed type includes any data update, insertion, or
removal.
Example
This example shows how to set the SNMP notification state to enable for a range of
interfaces from interfaces 1-5.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#interface range tenGigabitEthernet 1/0/1-1/0/5
DXS-3600-32S(config-if-range)#lldp notification
DXS-3600-32S(config-if-range)#
Example
This example shows how to set the SNMP notification state to default value for a
range interface from interfaces 1-5.
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#interface range tenGigabitEthernet 1/0/1-1/0/5
DXS-3600-32S(config-if-range)#no lldp notification
DXS-3600-32S(config-if-range)#
ipv4 ip-address Specifies the IPv4 address.
Default
The LLDP management address entry of each physical interface is disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12
Loading ...
Loading ...
Loading ...