Loading ...
Loading ...
Loading ...
MAINTENANCE AND SERVICE
}}
615
2. Carefully pry the plastic sleeve by the con-
nector's locking lug to release it.
3. Remove the connector from the bulb.
4. Replace the bulb.
5. Position the bulb in the socket and turn it
downward.
Related information
•
Location of exterior lights (p. 613)
•
Removing the plastic cover to replace bulbs
(p. 612)
•
Removing the rectangular headlight cover
(p. 612)
•
Bulb specifications (p. 617)
Replacing daytime running lights/
front parking light bulbs
The daytime running light/parking light bulbs in
the halogen headlights can be changed without
the help of a workshop.
Before the bulbs can be replaced, the plastic cov-
ering over the headlight must be removed.
Before the lamp can be replaced, the rectangular
headlight cover must be removed.
NOTE
Daytime running lights/parking lights are eas-
ier to reach if the high beam headlight bulbs
are removed. The high beam headlights are
mounted above and to the side of the daytime
running lights/parking lights. Remove the
high beam headlight bulb by turning the bulb
holder upward and then pulling it straight out.
CAUTION
Never touch the bulb glass with your bare fin-
gers. Grease and oils from your fingers vapor-
ize in the heat and will leave a deposit on the
reflector, which may damage it.
Left headlight.
1. Pull the daytime running light/parking light
bulb holder straight out.
2. Remove the bulb by pulling it straight out.
3. Replace the bulb.
4. Position the bulb holder in the socket and
push it into place.
5. If the high beam bulb holder has come loose,
position it in the socket and turn downward.
Related information
•
Location of exterior lights (p. 613)
•
Removing the plastic cover to replace bulbs
(p. 612)
•
Removing the rectangular headlight cover
(p. 612)
Loading ...
Loading ...
Loading ...