Loading ...
Loading ...
Loading ...
LOADING, STORAGE AND PASSENGER COMPARTMENT
}}
* Option/accessory.
589
Installing and removing the steel
cargo grid*
The steel cargo grid helps prevent loads or pets
in the cargo compartment from being thrown for-
ward into the passenger compartment.
For safety reasons, the steel grid must always be
installed and secured correctly.
WARNING
Under no circumstances may a person be in
the cargo compartment when the vehicle is
moving. Heavy braking or a collision could
lead to serious injury.
The steel grid consists of the grid itself and two
separate mounting brackets. Each of the mount-
ing brackets has a screw cover and two plastic
sleeves for the grid.
WARNING
The steel cargo grid may only be used in the
rear position described here. The ceiling
attachment points behind the front seats are
not intended to anchor the steel grid.
WARNING
For safety reasons, the third-row seats
5
must
be folded down when the steel cargo grid is
mounted in the vehicle.
CAUTION
The steel cargo grid and the cargo compart-
ment cover cannot be mounted at the same
time.
Installation
1. Fold down the rear seats and lift in the steel
grid through one of the rear doors or the tail-
gate. The curved (convex) side of the grid
should face toward the cargo compartment
and the hooks on each side of the grid
should face upward. The mounting brackets
and plastic sleeves are not needed in this
step.
2.
Press one of the grid's hooks into the larger
hole in the ceiling attachment point (1).
Grasp the grid near the hook and pull/push it
into the smaller hole (2).
> The hook is now secured in the attach-
ment point.
3. Repeat step 2 above to secure the other
hook in the attachment point on the opposite
side.
WARNING
Make sure the cargo grid's hooks are securely
attached in the ceiling attachment points to
help ensure the grid does not come loose.
5
7-seat models only.
Loading ...
Loading ...
Loading ...