Loading ...
Loading ...
Loading ...
MAINTENANCE AND SERVICE
* Option/accessory.
611
If you are experiencing problems with any lights
other than light bulbs, contact a workshop
15
. If
there is a problem with an LED
14
light, the entire
lamp unit will normally need to be replaced.
WARNING
The vehicle electrical system must be in igni-
tion mode 0 when bulbs are replaced.
CAUTION
Never touch the bulb glass with your bare fin-
gers. Grease and oils from your fingers vapor-
ize in the heat and will leave a deposit on the
reflector, which may damage it.
NOTE
If the error message persists after the defec-
tive bulb has been replaced, we recommend a
visit to an authorized Volvo workshop.
NOTE
Exterior lighting such as headlights and tail-
lights may develop temporary condensation
on the inside of the lens. This is normal. All
exterior lighting is designed to resist this.
Condensation is normally vented out of the
lamp housing once the light has been lit for
some period of time.
NOTE
Bulbs for active curve lighting* contain traces
of mercury and should therefore always be
submitted to a certified Volvo service techni-
cian.
Related information
•
Location of exterior lights (p. 613)
•
Removing the plastic cover to replace bulbs
(p. 612)
•
Removing the rectangular headlight cover
(p. 612)
•
Replacing the low beam headlight bulbs
(p. 614)
•
Replacing the high beam headlight bulbs
(p. 614)
•
Replacing daytime running lights/front park-
ing light bulbs (p. 615)
•
Replacing front turn signal bulbs (p. 616)
•
Bulb specifications (p. 617)
15
An authorized Volvo workshop is recommended.
14
LED (Light Emitting Diode)
Loading ...
Loading ...
Loading ...