Loading ...
Loading ...
Loading ...
WINDOWS, GLASS AND MIRRORS
}}
181
Continuous wipers
Move the lever upward for the wipers to
operate at normal speed.
Move the lever upward again for the wip-
ers to operate at high speed.
CAUTION
Before activating the wipers, make sure that
the wiper blades are not frozen in place and
that any snow or ice on the windshield and
rear window has been scraped away.
CAUTION
Use plenty of washer fluid when the wipers
clean the windshield. The windshield must be
wet when the windshield wipers are working.
Related information
•
Using the rain sensor (p. 181)
•
Using the windshield and headlight washers
(p. 183)
•
Using automatic rear window wiping when
backing up (p. 185)
•
Wiper blades and washer fluid (p. 180)
•
Using the rain sensor's memory function
(p. 182)
•
Using the rear window wiper/washer
(p. 184)
•
Filling washer fluid (p. 652)
•
Windshield wipers in the service position
(p. 651)
•
Replacing windshield wiper blades (p. 650)
•
Changing rear window wipers (p. 649)
Using the rain sensor
The rain sensor monitors the amount of water on
the windshield and automatically starts the wind-
shield wipers. Rain sensor sensitivity can be
adjusted using the thumb wheel on the right-
hand steering wheel lever.
Right-hand steering wheel lever.
Rain sensor button
Thumb wheel, sensitivity/interval wiper speed
When the rain sensor is activated, the
rain
sensor symbol will be displayed in the instrument
panel.
Activating the rain sensor
When the rain sensor is activated, the engine
must be running or the ignition must be in mode I
or II. The windshield wiper lever must also be in
position 0 or in the single sweep position.
Loading ...
Loading ...
Loading ...