Loading ...
Loading ...
Loading ...
STARTING AND DRIVING
}}
* Option/accessory.
473
programmable buttons and an indicator light in
the mirror.
For more information about HomeLink
®
, please
visit www.HomeLink.com, www.youtube.com/
HomeLinkGentex or call 1-800-355-3515.
Save the original remote controls for future pro-
gramming (e.g. for use in another vehicle). It is
also advisable to delete the button programming
if the vehicle is sold.
Related information
•
Using HomeLink
®
* (p. 474)
•
Programming HomeLink
®
* (p. 473)
•
Type approval for HomeLink
®
* (p. 475)
Programming HomeLink
®
*
13
Follow these instructions to program
HomeLink
®
, reset all programming, or program
individual buttons.
NOTE
In some vehicles, the ignition must be on or in
the "accessory position" before HomeLink
®
can be programmed or used. It can be a good
idea to put new batteries in the remote con-
trol being replaced by HomeLink
®
for faster
programming and better radio signal trans-
mission. The HomeLink
®
buttons should be
reset before programming.
WARNING
While HomeLink
®
is being programmed, the
garage door or gate being programmed may
be activated. Make sure that no one is near
the door or gate during programming. When
programming a garage door opener, it is
advised to park outside of the garage.
1.
Point the remote control at the HomeLink
®
button to be programmed and hold it about
2-8 cm (1-3 inches) from the button. Do not
obstruct the HomeLink
®
indicator light.
Note: Some remote controls are more effec-
tive at programming HomeLink
®
from a dis-
tance of about 15-20 cm (6-12 inches). Try
moving the remote control closer or further
away if you are experiencing any difficulties
programming.
2. Press and hold both the remote control but-
ton and the HomeLink
®
button to be pro-
grammed.
3. Do not release the buttons until the indicator
light has stopped flashing slowly (about once
a second) and either flashes quickly (about
10 times a second) or glows steadily.
>
Steady glow: Indication that program-
ming is complete. Press the programmed
button twice to activate.
Flashing quickly: The device being pro-
grammed with HomeLink
®
may have a
security function that requires an extra
step. Try pressing the programmed button
twice to see whether the programming
works. Otherwise, continue with the fol-
lowing steps.
11
Certain markets only.
12
HomeLink and the HomeLink house symbol are registered trademarks of Gentex Corporation.
13
Certain markets only.
Loading ...
Loading ...
Loading ...