Loading ...
Loading ...
Loading ...
DRIVER SUPPORT
}}
297
Deactivating and putting Cruise
Control in standby mode
Cruise Control (CC
27
) can be temporarily put
into standby mode and then reactivated.
Deactivating and putting Cruise Control
in standby mode
Note: This illustration is general and details may vary
depending on model.
To put Cruise Control in standby mode:
–
Press the button on the steering wheel
(2).
> The Cruise Control markings and symbols
will change from WHITE to GRAY, indicat-
ing that Cruise Control is temporarily
deactivated and the driver needs to con-
trol the vehicle's speed.
Standby mode due to action by the driver
Cruise Control will be temporarily deactivated and
put in standby mode if:
•
the brakes are applied
•
the gear selector is moved to N
•
the vehicle is driven faster than the set
speed for more than 1 minute
The driver must then control the vehicle's speed.
Temporarily increasing speed using the accelera-
tor pedal, e.g. when passing another vehicle, will
not affect the setting. The vehicle will return to
the set speed when the accelerator pedal is
released.
Automatic standby mode
Cruise Control will be temporarily deactivated and
put in standby mode if:
•
the wheels lose traction
•
the engine speed (rpm) is too low/high
•
the temperature in the brake system
becomes too high
•
the vehicle's speed goes below 30 km/h
(20 mph).
The driver must then control the vehicle's speed.
Related information
•
Cruise control (p. 293)
Reactivating Cruise Control from
standby mode
Cruise Control (CC
28
) can be temporarily put
into standby mode and then reactivated.
Reactivating Cruise Control from
standby mode
Note: This illustration is general and details may vary
depending on model.
To start Cruise Control from standby mode:
–
Press the button on the steering wheel
(1).
> The Cruise Control marking in the instru-
ment panel will change from GRAY to
WHITE and the vehicle will then return to
the most recently set speed.
27
Cruise Control
28
Cruise Control
Loading ...
Loading ...
Loading ...