Loading ...
Loading ...
Loading ...
MAINTENANCE AND SERVICE
612
Removing the plastic cover to
replace bulbs
The headlight bulbs can be replaced without the
assistance of a workshop, but before a bulb can
be replaced, the plastic cover over the headlight
needs to be removed.
Lift the rubber strip by pressing it inward into
the engine compartment.
Release the pins in the plastic cover's four
clips by pressing them down with a screw-
driver or similar object and remove the cover-
ing.
Put the cover back in place in the reverse order.
Related information
•
Replacing bulbs (p. 610)
•
Replacing the low beam headlight bulbs
(p. 614)
•
Replacing the high beam headlight bulbs
(p. 614)
•
Replacing daytime running lights/front park-
ing light bulbs (p. 615)
•
Replacing front turn signal bulbs (p. 616)
•
Bulb specifications (p. 617)
Removing the rectangular headlight
cover
Most of the bulbs in the headlight housing can
be accessed when the rectangular cover is
removed.
Before the rectangular cover can be removed, the
plastic covering over the headlight must be
removed.
Left headlight.
1. Undo the four screws of the cover using a
Torx tool, dimension T20 (1). Do not undo
these completely; 3–4 turns is enough.
Push the cover to the side.
3. Remove the cover.
Put the cover back in place in the reverse order.
Loading ...
Loading ...
Loading ...