Loading ...
Loading ...
Loading ...
||
LOADING, STORAGE AND PASSENGER COMPARTMENT
* Option/accessory.
588
Loading mode
From the fully retracted position - grasp the
handle and pull the cover up and over the
side panels in the cargo compartment. Pull to
the end position and press the attaching pins
at the end of the cover into the grooves in
the side panels of the vehicle. (If the cover is
already fully open, see next section.)
From the fully open position - grasp the han-
dle and press the cover's attaching pins
down into the grooves in the side panels and
then release.
> Retract the cover until it stops in the parti-
ally retracted position.
If your hands are full:
In the fully open position, push the cover's
handle slightly upward with e.g. your elbow.
>
The cover will retract until it stops in
the partially retracted position.
To fully open the cover from the partially retrac-
ted position:
1. Grasp the handle and pull the cover out as
far as possible.
2. Let the cover retract slightly and press the
handle slightly downward.
> The cover will be secured in the fully open
position.
Retracting the cover
1. From the fully opened position:
Lift the cover's handle and pull it rearward to
release the cover's attaching pins from the
grooves. Let the cover retract.
From the partially retracted position:
Grasp the handle and pull the cover out of
the groves to the fully open position. Lift the
handle and pull it rearward to release the
cover's attaching pins from the grooves. Let
the cover retract.
2. Let the cover retract with its attaching pins
above the side panels until it stops in the
fully retracted position.
Related information
•
Installing and removing the cargo compart-
ment cover* (p. 586)
Loading ...
Loading ...
Loading ...