Loading ...
Loading ...
Loading ...
STARTING AND DRIVING
* Option/accessory.
476
Compass*
An integrated compass in the upper right corner
of the rearview mirror shows the direction the
vehicle is traveling.
Rearview mirror with compass.
Eight different compass directions are shown
with the abbreviations:
N (north), NE (northeast),
E (east), SE (southeast), S (south), SW (south-
west), W (west) and NW (northwest).
Related information
•
Activating and deactivating the compass*
(p. 476)
•
Calibrating the compass* (p. 476)
Activating and deactivating the
compass*
An integrated compass in the upper right corner
of the rearview mirror shows the direction the
vehicle is traveling.
Activating and deactivating the
compass
The compass is automatically activated when the
vehicle is started.
To deactivate/activate the compass manually:
–
Use a paper clip or similar object to press the
button on the bottom of the mirror.
Related information
•
Compass* (p. 476)
•
Calibrating the compass* (p. 476)
Calibrating the compass*
The globe is divided into 15 magnetic zones.
The compass should be calibrated if the vehicle
is driven from one zone to another.
To calibrate the compass:
1. Stop the vehicle in a large, open area away
from steel constructions and high-voltage
power lines.
2. Start the engine and switch off all electrical
equipment (climate system, wipers, etc.) and
make sure all doors are closed.
NOTE
Calibration may fail or not even be initiated if
electrical equipment is not turned off.
3. Hold the button on the bottom of the rear-
view mirror pressed for about 3 seconds
(using e.g. a paper clip). The number of the
current magnetic zone is shown.
Loading ...
Loading ...
Loading ...