Loading ...
Loading ...
Loading ...
WHEELS AND TIRES
}}
* Option/accessory.
559
Jack*
The jack can be used to lift the vehicle to e.g.
change a wheel.
The illustration is generic – the design may vary.
CAUTION
•
When not in use, the jack* should be kept
in its storage compartment under the
cargo compartment floor.
•
The jack provided with your vehicle is
intended to be used only in temporary sit-
uations such as changing wheels in the
event of a flat tire. Only the jack that
came with your particular model should
be used to lift the vehicle. If the vehicle
needs to be lifted more frequently or for a
prolonged period, using a garage jack or
hoist is recommended. Always follow this
device's instructions for use.
The jack needs to be cranked together to the
correct position in order to fit.
Models with leveling control*
If the vehicle is equipped with the optional pneu-
matic suspension, it must be turned off before
the vehicle is lifted on a jack.
Related information
•
Tool kit (p. 558)
Wheel bolts
The wheel bolts hold the wheel in place on the
wheel hub.
CAUTION
The wheel bolts should be tightened to
140 Nm (103 ft. lbs.). Over-tightening or
under-tightening could damage the threaded
joints.
Only use rims that have been tested and
approved by Volvo and are included in Volvo's
original product range.
Use a torque wrench to check that the wheel
bolts are tightened correctly.
Do not grease the wheel bolt threads.
WARNING
The wheel bolts may need to be tightened
again several days after a wheel change.
Temperature fluctuations and vibrations can
cause them to loosen slightly.
Locking wheel bolts*
A tool for removing the locking wheel bolts is
located in the foam block under the cargo com-
partment floor.
Loading ...
Loading ...
Loading ...