Loading ...
Loading ...
Loading ...
● Re-install
the drum cartridge. If re-installing the drum cartridge fails to clear the error message, the drum
cartridge may be faulty. Contact the store where you purchased the drum cartridge or consult the Canon
Customer Help Center.
Procedure for Replacing the Drum Cartridge(P. 448)
Cartridge communication error. A counterfeit or non-Canon toner cartridge
may be in use./Cart. Comm. Err
or A counterfeit or non-Canon toner cart.
may be in use.
The toner cartridge may not be installed correctly or may be faulty.
● Re-install
the toner cartridge. If re-installing the toner cartridge fails to clear the error message, the toner
cartridge may be faulty. Contact the store where you purchased the toner cartridge or consult the Canon
Customer Help Center.
Procedure for Replacing the Toner Cartridge(P. 444)
Check the authentication settings.
The authentication method set on the machine does not match the authentication method set on the
RADIUS server.
● Check
that the same authentication method is set on this machine and the RADIUS server, and set the
correct authentication method.
Conguring IEEE 802.1X Authentication Settings(P
. 318)
Cooling down... Wait a moment, then try again.
The temperature of the xing assembly is high.
● W
ait for a while until the xing assembly cools down. After the temperature of the xing assembly falls, try
the operation again.
Cooling down... Wait a moment.
The temperature of the xing assembly is high.
● W
ait for a while until the xing assembly cools down. After the temperature of the xing assembly falls,
the message will disappear.
Could not connect. (for Access Point Mode connection)
Connection in Access Point Mode failed due to an error.
● W
ait a few moments and try again. If you still cannot connect, turn OFF the machine, and then turn it back
on again.
Connecting Directly (Access Point Mode)(P. 269)
Troubleshooting
495
Loading ...
Loading ...
Loading ...