Loading ...
Loading ...
Loading ...
➠ The PIN code is gener
ated and shown on the display.
From a Computer
8
Register the generated PIN code to the wireless router.
● Register the PIN code on the setup scr
een displayed in step 1.
● The PIN code must be registered within 10 minutes after selecting <Yes> in step 7.
If an error message is displayed during setup
● Select <Close> and r
eturn to step 6.
From the Operation Panel
9
Wait until the message <Connected.> is displayed.
➠ W
ait several minutes until the IP address and other items are set automatically.
Signal strength
● When more than one wireless router is available for connection, the machine connects to the device
with the strongest signal. Signal strength is measured using RSSI (Received Signal Strength Indication).
● You can set the IP address manually. Setting IP Addresses(P. 31)
● On the touch panel model, while the machine is connected to the wireless LAN, the Wi-Fi icon is
displayed in the Home screen. Home Screen(P. 111)
Reducing power consumption
● Y
ou can set the machine to enter <Power Save Mode> based on signals emitted from the wireless router.
<Power Save Mode>(P. 364)
If the IP addr
ess of the machine has changed
● In a DHCP environment, the IP address of the machine may be changed automatically. If this happens, the
connection is maintained as long as the machine and the computer belong to the same subnet.
LINKS
Connecting to a Wireless LAN(P. 18)
Setting Up
23
Loading ...
Loading ...
Loading ...