Loading ...
Loading ...
Loading ...
(53,1)
[ Edit: 2020/ 8/ 19 Model: T32-A ]
SSS0361B
Front-facing: Step 5
5. Pull the shoulder belt until the entire belt is
extended. At this time, the seat belt retrac-
tor is in the automatic locking mode (child
restraint mode).
SSS0423A
Front-facing: Step 6
6. Allow the seat belt to retract. Pull up
on
the shoulder belt to remove any slack in the
belt.
JVR0287X
Front-facing: Step 7
7. Test the child restraint before you place the
child in it. Tilt it from side to side. Try to tug
it forward and check if it is held securely in
place.
8. Check that the retractor is in the automatic
locking mode by trying to pull more of the
seat belt out of the retractor. If you cannot
pull any more belt webbing out of the
retractor, the retractor is in the automatic
locking mode.
9. Check to make sure that the child restraint
is properly secured prior to each use. If the
seat belt is not locked, repeat steps 5
through 8.
10. Place the ignition switch in the “ON” posi-
tion. The front passenger air bag status
light
should illuminate. If this light is
not illuminated, see “Front passenger air
bag status light” (P.1-43). Move the child
restraint to another seating position.
Have the system checked by a NISSAN
dealer.
After the child restraint is removed and the seat
belt is fully retracted, the automatic locking
mode is canceled and returned to the emer-
gency locking mode.
Safety — seats, seat belts and supplemental restraint system 1-31
Condition: 'Except for China'/
Loading ...
Loading ...
Loading ...