Loading ...
Loading ...
Loading ...
(332,1)
[ Edit: 2020/ 8/ 19 Model: T32-A ]
5-40 Starting and driving
vehicle speed when driving under 25 km/h (15
MPH) on a steep descent that engine braking
alone in Four-Wheel Drive (4WD)/All-Wheel Drive
(AWD) mode cannot control the speed.
When driving forward on the descent, the
speed can be adjusted by the brake or accel-
erator operation. The system maintains the
speed for reverse driving on the descent.
HILL DESCENT CONTROL SWITCH
T32A130827-A22A42E7-41B2-4114-88DB-9E1B7BDE94E3
JVS0402X
When additional braking is required on steep
downhill roads, activate the hill descent control
system by pushing the hill descent control
switch on.
When the hill descent control system is acti-
vated, the hill descent control system on
indicator light
will illuminate. (See “Hill
descent control system on indicator light”
(P.2-18).) Also, the stop/tail lights illuminate
while the hill descent control system is applying
the brakes to control the vehicle speed.
To activate the hill descent control system,
satisfy all of the following conditions:
. Shift the transmission to the forward or
reverse gear.
. Turn the Intelligent 4x4 mode switch to the
LOCK mode and drive the vehicle at a
speed under 25 km/h (15 MPH).
. Push the hill descent control switch to the
“ON” position.
If the accelerator or brake pedal is depressed
while the hill descent control system is on, the
system will stop operating temporarily. As soon
as the accelerator or brake pedal is released,
the hill descent control system begins to
function again if the hill descent control
operating conditions are fulfilled.
The hill descent control system on indicator
light blinks if the hill descent control switch is
on and all conditions for system activation are
not met, or if the system becomes disengaged
for any reason.
When the vehicle speed exceeds 40 km/h (25
MPH), the 4WD mode indicator light changes
from LOCK to AUTO. Once the speed decreases
to 25 km/h (15 MPH), turn the Intelligent 4x4
mode switch to LOCK again to turn on the hill
descent control system.
To turn off the hill descent control system, push
the hill descent control switch to the OFF
position.
GUID-8028EE70-D018-41B3-BA32-7A61E10E2802
JVS0939X
WARNING:
Failure to follow the warnings and instruc-
tions for proper use of the LDW system could
result in serious injury or death.
. This system is only a warning device to
inform the driver of a potential unin-
tended lane departure. It will not steer
the vehicle or prevent loss of control. It is
the driver’s responsibility to stay alert,
drive safely, keep the vehicle in the
traveling lane, and be in control of the
vehicle at all times.
The LDW system will operate when the vehicle
is driven at speeds of the following speeds and
above, and only when the lane markings are
clearly visible on the road.
. approximately 60 km/h (37 MPH) (for Eur-
ope)
. approximately 70 km/h (43 MPH) (except
for Europe)
The LDW system monitors the lane markers on
the traveling lane using the camera unit
located above the inside mirror.
The LDW system warns the driver with a LDW
indicator on the vehicle information display
LANE DEPARTURE WARNING (LDW)
(if equipped)
Condition: 'Except for China'/
Loading ...
Loading ...
Loading ...